Skip to content

Re-Roofing on the Northern Beaches

A re-roof replaces the whole roof covering, usually with Colorbond steel, either over an old metal roof or as a tile-to-metal change. Published Sydney figures put a Colorbond re-roof at $92 to $205 per m², or about $16,560 to $36,900 for a 180 m² home (about $25,200 typical). One licensed local roofer will measure and quote.

Updated November 2026

Re-Roofing prices

  • Colorbond re-roof$92–$205 per m²
  • 180 m² like-for-like Colorbond re-roof$16,560–$36,900 (about $25,200 typical)
  • Tile removal and disposal (tile to metal)roughly $20–$50 per m²

Published Sydney price ranges, not a quote. Your price is confirmed in writing before any work starts.

Get my free quote

Signs it is time for re-roofing

  • Rust through the sheets, not just on the surface
  • Leaks in several places on a metal roof
  • Tile roof with failing battens or lots of broken tiles
  • You are renovating or adding a second storey
  • You want to get rid of ridge pointing maintenance for good

Which Colorbond for a Northern Beaches home?

It depends on how far you are from breaking surf. BlueScope's guidance: standard COLORBOND steel suits roofs more than 200 metres from breaking surf; COLORBOND Ultra is designed for 100 to 200 metres (severe marine); and closer than 100 metres calls for stainless or another specialist product. Screws, flashings and gutters should match.

That matters on beachfront streets in Manly, Queenscliff, Curl Curl, Dee Why, Collaroy, Narrabeen, Newport, Avalon and Palm Beach. Further inland, such as Frenchs Forest or Belrose, standard Colorbond is normally fine.

Tile to metal

Replacing tiles with Colorbond takes a lot of weight off the house, ends ridge pointing maintenance and usually stops recurring leaks. Removing and disposing of the old tiles adds to the cost; published Sydney figures put it at roughly $20 to $50 per m². Battens are usually changed to suit metal sheeting, and new sarking or insulation blanket can go in at the same time.

What a proper re-roof includes

Removal of the old roof, new battens where needed, sarking or insulation blanket, new sheeting, ridge, hip and barge flashings, new gutters and downpipes if they are part of the job, and safety rails while work is done. Get each item listed in the quote.

Licences, contracts and insurance

Metal roofing is roof plumbing in NSW and needs the right licence for work over $5,000. Any job over $5,000 needs a written contract with a deposit of no more than 10%, and over $20,000 the builder must provide Home Building Compensation cover before taking a deposit.

How much does re-roofing cost on the Northern Beaches?

JobTypical Sydney price
Colorbond re-roof$92–$205 per m²
180 m² like-for-like Colorbond re-roof$16,560–$36,900 (about $25,200 typical)
Tile removal and disposal (tile to metal)roughly $20–$50 per m²

Published Sydney price ranges (GST incl.) from whatsthedamage.com.au and Yellow Pages, not our quote. Roof size, pitch, storeys, access, coastal-grade materials and gutters decide your price. See every job in the Northern Beaches roofing cost guide.

The standard we ask of every roofer we refer you to

The roofer does the work, not us. Ask for each of these in your written quote and contract.

  • A roofer licensed in NSW for the work, with public liability insurance (certificate on request)
  • A written quote that lists what will be done, the materials and the price
  • A written contract for any job over $5,000, as NSW law requires
  • Photos of the problem before work starts, and of the finished work
  • Materials matched to how close you are to the surf (BlueScope's coastal guidance for Colorbond)
  • Site left clean: old tiles, sheets and screws taken away, gutters cleared of debris
  • A walk-through of the finished job before final payment

Before and after photos, and a written scope

You get photos of what was wrong and what was done, and a written scope before anything starts, so you know exactly what you are paying for.

Licensed, insured roofer, public liability certificate on request

Recent roofing work

Tile to metal re-roof in progress, new battens and corrugated sheets going on
Tile to metal re-roof in progress, new battens and corrugated sheets going on
Aerial view of a finished grey corrugated Colorbond re-roof
Aerial view of a finished grey corrugated Colorbond re-roof
Finished standing seam metal re-roof with solar panels on a two-storey home
Finished standing seam metal re-roof with solar panels on a two-storey home

Photos from past roofing jobs, not necessarily by the roofer you are matched with. Ask your roofer for photos of their own recent work.

Our standard

A roof job done properly, by a licensed roofer

A cheap roof job that only patches the stain usually means paying twice. That's why every job we pass on goes to a licensed, insured Northern Beaches roofer who agrees to this standard before they get the work.

Licensed for the job

Roofing work over $5,000 in NSW needs a licence, and metal roofing, gutters and flashings fall under roof plumbing. Jobs only go to roofers who hold the right licence and insurance.

The cause, not just the drip

Most leaks show up metres away from where the water gets in. The roofer finds the entry point (flashing, ridge, cracked tile, rusted screw) and fixes that, not just the stain.

Coastal-grade materials

Within a few hundred metres of the surf, standard Colorbond and screws corrode faster. Materials are chosen to suit your distance from the beach, using BlueScope's published guidance.

Safe on the roof

Work on a roof is high-risk construction work under SafeWork NSW rules. Roofers use edge protection or harnesses and a safe work method statement, not a ladder and good luck.

A written price first

You get the scope and price in writing before work starts. Under NSW law, any variation to the contract should be agreed in writing.

Photos of everything

Before and after photos of the problem and the repair, so you can see what you paid for without climbing up.

Left clean

Old tiles, sheets, screws and offcuts taken away, and gutters cleared of anything that came off the roof.

Real roof repair photos

Corrugated metal roof before and after rusted screws were replaced, after
Corrugated metal roof before and after rusted screws were replaced, before
BEFORE
AFTER
Metal roof re-screw: rusted screws and perished washers replaced. Example job photo from a past roofing job, not necessarily by the roofer you are matched with.
Leaking skylight flashing before and after being replaced, after
Leaking skylight flashing before and after being replaced, before
BEFORE
AFTER
Leaking skylight flashing replaced. Example job photo from a past roofing job, not necessarily by the roofer you are matched with.

Re-Roofing questions

Most homes take three to seven working days, depending on size, weather and whether it is tile to metal.